Brass parts for sockets & power strips, stamped to your drawing.
Send a drawing, or a sample photo with dimensions. You get a price and a manufacturability note within 24 hours. We stamp brass terminals, socket inserts and power strip brass contacts in H62/H65 brass and phosphor bronze — and the plastic housing, the hardware and the cable come from the same supplier.
NDA signed before we quote · Trial orders welcome · Material test and RoHS reports with every batch
Our own works in Zhongshan, Guangdong — brass strip, progressive presses and the die shop that feeds them.
What we make
Three product lines, from one supplier
Three end products, one supply chain: smart sockets, power strips, and lamp holders and sensors. We make the brass terminals and socket inserts inside them, and we also supply the housing, the hardware and the cable — so the whole accessory set ships together.

Smart socket parts
Contact clips, relay and module terminals, busbars and earth parts for smart sockets and smart plugs. Supplied with the housing, the screws and the cable.
See this line
Power strip accessories
Power strip brass contacts, busbars, terminals and pins for every standard from BS1363 to Type L. Supplied with the housing, the hardware and the cable.
See this line
Lamp holder & sensor parts
Screw-shell contacts, spring contacts and crimped lead-wire terminals for lamp holders, lamp bases and sensors.
See this lineAlso available
Finished power strips — we supply the brass, or the whole unit
Buy the brass parts and assemble yourself, or take the finished unit. Both start on the same stamping lines in Zhongshan.
- Built to your market standard — BS1363 (UK), Schuko and French (EU), NEMA 5-15 (US), AS/NZS 3112, and Type L (Italy)
- Socket count, cable length, switch, indicator and USB-A / USB-C charging configured to your market
- Your brand, your packaging, your artwork
- Finished-product certification (CE, UKCA, UL, SNI, TIS, SIRIM, SASO / G-Mark) is arranged with the assembler per order — we supply the component documentation to support it
Why buyers switch to us
Five reasons buyers leave a supplier — and our answer to each
Most switches happen for one of these five reasons. Here is what we do about each.
-
Drawing-based Quote
We quote from the drawing, not a catalogue. The die is cut for your geometry, so the part is yours. Who owns the tooling, and what happens to it, is agreed in writing before it is cut.
-
Manufacturability Note
The price comes with a manufacturability note. If a small change removes a forming step or cuts material, we tell you before tooling is made.
-
Batch Documents
Every batch ships with paper. Material test report, RoHS report and dimensional records — so your incoming inspection has something to check against.
-
Trial Quantities
Trial quantities are standard, not an exception. Test a few thousand pieces in your line before a production order.
-
Certification Support
Component-level third-party testing can be arranged upon request to support your finished-product certification (UL, CE, etc.).
How a custom part moves
Four steps from drawing to container
Send the drawing — or a photo
2D or 3D file, or a sample photo with key dimensions. Your drawing stays with us. Under NDA? Tell us and we sign before you send anything.
Quote and manufacturability note — 24 hours
Material recommendation, thickness, tolerance on the critical dimensions, tooling cost, MOQ, lead time and a unit price band.
Tooling and first article — 30–45 days
The die is cut, the first pieces are pressed and measured, and a sample is sent with its material report.
Production, inspection, shipment
We run the order, inspect against the agreed drawing, pack for sea freight and ship from Shenzhen or Guangzhou. Photographs of the packed goods before dispatch.
Markets
Where our parts end up
Same parts, same documents — what changes between markets is the plug standard, the packing and who carries the finished-product certification.
Southeast Asia
Our main market. Vietnam, Indonesia, Thailand and Malaysia together host the region’s socket and power strip assembly base, and most of their brass parts are imported.
- Tariff-friendly under ACFTA / RCEP
- Trial quantities that match a line change-over
- Reachable on LINE (Thailand) and Zalo (Vietnam)
Middle East
The Gulf runs mostly on BS1363-style sockets, so the same parts serve the region. Distributors and assemblers in the UAE and Saudi Arabia, plus re-export through Dubai.
- SASO / G-Mark handled at finished-product level
- Export packing built for sea freight and heat
- WhatsApp is the working channel
Europe & North America
High-volume importers and brand owners who need steady quality and full documentation more than they need the lowest price.
- Component-level reports that support CE / UKCA / UL files
- Dimensional records for incoming inspection
- Repeat-order pricing stability
Tell us the destination market and we build and document to the standard you sell into.
Quality
Quality you can ask for documents on
Anyone can say the parts are good. Ask for the paperwork and the argument ends — material grade checked against the strip certificate, and a batch record that traces a shipment back to the strip it came from.
- Material test report and RoHS report with every batch
- First-article approval before mass production
- Dimensional inspection with calipers and gauges
- Visual inspection for burrs, bends, plating and surface defects
- Quantity and packing check before dispatch, with photos
Before you write
Questions buyers ask first
Are you a factory or a trading company?
We are based in Zhongshan, Guangdong, in our own hardware works — established in 2010, with stamping, die making, forming and inspection under one roof. You deal with one person from the first enquiry to the shipping documents. If a part needs a process we do not run in-house — plating, heat treatment — we tell you where it is done and who controls it, rather than leaving you to find out.
What is your MOQ?
It depends on the part. For items already running we keep it low, and small trial orders are welcome — the point of a trial is to find out whether the part works in your line. Tell us the quantity you have in mind and we will confirm what is realistic.
Do you have certifications?
We supply component-level documentation: a material test report and a RoHS report with every batch, plus dimensional records. Finished-product certification — CE, UKCA, UL, SNI, TIS, SIRIM, SASO, G-Mark — sits at the appliance level and is arranged by the assembler. We support that process with our component documents and will tell you exactly what we can and cannot provide.
Can you make parts from my drawing?
Yes — 2D or 3D drawing, or a sample photo with dimensions. Where a new die has to be made, allow about 30–45 days from the confirmed drawing to the first-article sample; a part we already run can come from stock. Send the file through the quote form or on WhatsApp.
How do prices and payment work?
Brass parts are quoted against the copper price of the day, so a quotation is confirmed again at each purchase order rather than locked for a year. Payment is usually T/T 30% deposit with the balance against a copy of the bill of lading. FOB Shenzhen or Guangzhou as standard; EXW on request. Samples ship by express.
How fast do you reply?
Within 24 hours on business days, and usually the same working day. Send the part details and the quantity and you will get a real answer, not a request to get on a call.